|
SPECIFICATIONS
|
|
Make:
|
McLaren |
|
Model:
|
M16C |
|
Year:
|
1973 |
|
Color:
|
Orange |
|
Engine:
|
Chevrolet
V8 |
|
CC:
|
5815 |
|
Power:
|
710
bhp |
|
Transmission:
|
Hewland
LG 500 |
|
Brakes:
|
Lockheed
Discs |
|
Length:
|
158" |
|
Width:
|
74" |
|
Height:
|
34" |
|
Weight:
|
1450
lbs |
|
Chassis
no:
|
M16C-2 |
click
here for a link to
McLarens at Indianapolis 1971
- 1981
|
|
Team
McLaren competed in their first Indianapolis races in 1969. The
M15 was the first McLaren Indy car designed by Gordon Coppuck, based
on the team's Can-Am experiences. McLaren stuck to their usual race
winning methods of testing and re-testing a car until it was not
only good but extremely reliable, and within a few months McLaren
looked like they could have another winner. Then disaster struck.
In a practice session, the fuel cap on Hulme's car popped open,
releasing burning methanol all over driver and car. Hulme's hands
were badly burnt and he was unable to drive for quite awhile. Things
then got worse. On June 2, 1970, Bruce McLaren was killed while
testing an M8D Can-Am car at Goodwood. The team decided to deal
with this tragic loss by continuing to race in all the major races
on the USAC calendar. The M15 performed well but it was soon time
to look forward to the new season and design a car based on what
Team McLaren had learned in their first year at Indy.
The
M16 series was initiated in September 1970 and first revealed to
the press, ready to race, in January 1971 at Team headquarters in
Colnbrook, England. The M16 was designed by Coppuck who drew inspiration
from the pioneering wedge shaped Lotus Type 72 Formula 1 car. He
believed this car would be good for oval races as the forces applied
to the car are a lot more constant than Formula 1 with only 60 mph
speed difference between corners and straights. The shape was ideal
for continuous running but it gave a high level of downthrust at
the front which had to be balanced by a large wing at the back.
The tapering monocoque meant the M16 had to have its radiators situated
in the middle of the car, alongside the drivers hips. It also meant
the engine was slung semi-stressed into the monocoque's rear and
steadied by tubular A frames on either side. The fuel was stored
in the center of the wheelbase to promote lower polar movement.
Although two speed transmission is normal at Indy, McLaren decided
on a Hewland LG500 three speed as it gave better acceleration.
McLaren
built three M16Cs for the 1973 Indianapolis season. The M16C had
changed very little from the original M16 apart from the addition
of an engine cover to smooth airflow back onto the rear wing. The
car loved the fast, open circuits and was very stable at high speeds.
The M16C's debut began an unparalleled success at the Indy 500.
The
M16C-2 in the Mathews Collection became Peter Revson's McLaren Team
car after he crashed his own chassis at the Indy 500 in 1973. While
driving it, he qualified on the pole at both Pocono and Ontario.
McLaren, as was their standard practice, sold the car to a privateer,
Salt Walther at the end of the 1973 season. Walter raced it through
1974 and 1975 and then it went to David Hobbs in 1976. Jerry Karl
purchased the M16C-2 in 1978 as a backup car, converted it to a
stock block Chevy V8 and raced in the 1980 Indy where it placed
21st. Karl ran again at Indy in 1982. Although the M16C-2 was the
oldest McLaren in the field, it still managed a respectable 15th
place finish.
|
|